Start chat

Decorta

Home decor & accents

Custom modules and extensions

Attention Some modules may not be included into your template package. This section describes configuration of all modules that are used in our templates. Each template pack is provided with a set of modules which is included into the design of this specific template.

JX Accelerated Mobile Page

AMP is an open source library that provides a straightforward way to create web pages.

The module allows improving the functionality of PrestaShop online store on mobile devices and increasing the loading speed of the web pages. It provides the opportunity to create web pages that are compelling, smooth, and load near momentary for users.

Installation and Deleting

The module can be installed and deleted like any other PrestaShop module.

Please note: for the correct operation of AMP module, it will be desirable to activate SSL Certificate, an essential component that provides a high-security lever for your data.

SSL/HTTPS sites are preferable for Google, giving them better indexing and position in search results.

Module configuration

After the module has been successfully installed, you'll see the 'Configure' page that includes 7 tabs with the module settings.

AMP Pages Settings

You can easily create the AMP pages of the store homepage, category page, product page and others. The module will display the limited data of the pages and automatically affects the loading speed of these pages on mobile.

  • Use "Full page" button - get back to the original view of the page.
  • Homepage - enable/disable AMP for the Homepage.
  • Category pages - enable/disable AMP for the Category Listing Page.
  • Manufacturer pages - enable/disable AMP for the Manufacturer Page.
  • Supplier pages - enable/disable AMP for Supplier Page.
  • Product Info - enable/disable AMP for Product Info Pages.
  • New products - enable/disable AMP for new products section on the Homepage.
  • Bestseller products - enable/disable AMP for bestseller products section on the Homepage.
  • Special products - enable/disable AMP for special products section on the Homepage.
  • Search products - enable/disable AMP for the search by products on the Homepage.
You can check how the AMPs look, clicking Preview page in your admin panel or just entering " /jxamp/ " at the end of the location bar (when Friendly URL is enabled).

Homepage settings

You can organize the content of the AMP Homepage according to your preferences using the available settings below.

  • Homepage slider - show/hide slider block on the Homepage.
  • Sort order - set in what order the slider block will be displayed.
  • Featured Products - show/hide the featured products block on the homepage.
  • Featured Products Carousel - choose whether to display featured products block carousel on the Homepage.
  • Number of Featured Products -set the number of featured products to be displayed on the Homepage.
  • Featured Products sort order - set in what order the featured products block will be displayed.
  • New Products - show/hide the new products block on the Homepage.
  • New Products Carousel - choose whether to display the new products block carousel on the Homepage.
  • Number of New Products - set the number of new products to be displayed on the Homepage.
  • New Products sort order - set in what order the new products block will be displayed.
  • Special Products - show/hide special products block on the Homepage.
  • Special Products Carousel - choose whether to display special products block carousel on the Homepage.
  • Number of Special Products - set the number of special products to be displayed on the Homepage.
  • Special Products sort order - set in what order the special products block will be displayed on the Homepage.
  • Bestseller Products - show/hide bestseller products block on the Homepage.
  • Bestseller Products Carousel - choose whether to display bestseller products block carousel on the Homepage.
  • Number of Bestseller Products - set the amount of the bestseller products that will be displayed on the Homepage.
  • Bestseller Products sort order - set in what order the bestseller products block will be displayed on the Homepage.

Listing Settings

Organize the additional AMP listing settings.

  • Sort by:
    • name - sort the products by their names;
    • position - sort the products by their position;
    • price - sort the products by the price.
  • Sort Way:
    • asc - sort the products in ascending order;
    • desc - sort the products in descending order.
  • View more - enable/disable the "Read more" button on the listing page.
  • Products per page - set the quantity of the products per listing page.
  • Products Displaying Type:
    • list - present products vertically as a single continuous element.
    • grid - present products in the form of the repeated pattern of cells arrayed vertically and horizontally.
  • Display image - show/hide product image in miniature.

Product Info Page

You can set some additional settings for AMP Product Info Page.

  • Extra images - display products' extra images on the product info page.
  • Share buttons - enable/disable the share buttons (Facebook, Google+, Pinterest, Twitter).

Share Buttons

You may activate social share buttons on AMP pages in order to set social media sharing options on the product page.

  • Facebook button - enable/disable Facebook button.
  • Facebook API Key - enter your Facebook API Key.
  • Google+ button - enable/disable Google+ button.
  • Pinterest button - enable/disable Pinterest button.
  • Twitter button - enable/disable Twitter button.

Google Analytics

Make your accelerated mobile pages trackable by enabling Google Analytics.

  • Status - enable/disable Google Analytics script.
  • Google Analytic Key - enter your Google Analytics ID.

Extra Styles

Allows adding custom CSS styles.

  • Main background color - the value can be set in any color format (rgb, hex, etc.). You can choose the color using the Color Picker tool.

JX Blog

Introduction

JX Blog module allows creating a blog in your PrestaShop store in order to inform or educate the customers with helpful innovative content for your eCommerce website. You can write creative posts of new arrivals, future collections and accompany them with entertaining images; publish your posts right away or plan them to go live later.

JX Blog is the main module that contains the general settings for blog functionality.

There are additional JX Blog modules used to make the blog more functional:

  • JX Blog Comment module
    improves the main JX Blog module with powerful comments system. It is used to display and manage the comments added to the Blog posts.

    The module is compliant with official PrestaShop General Data Protection Regulation (GDPR) module, a new EU legal framework that governs how users' personal data is used.

  • JX Blog Post Posts module
    allows binding related posts to a post.
  • JX Blog Post Products module
    allows binding related products to posts.
  • JX Featured Posts module
    allows defining and setting posts as featured on the homepage of your store.

Installation of the module

The module can be installed like any other PrestaShop module.

When the module has been successfully installed, the JX Blog menu tab will appear in the main menu of your admin panel.

There you can add/remove/edit categories and posts, manage the main settings of the blog.

Categories

In order to create a blog post, firstly, it is necessary to create at least one category.

  • In your PrestaShop admin panel, in JX Blog section at the bottom, choose Categories menu (1). To create a new category, press the 'plus' (2) button in the top right corner of the category panel.

  • In the appeared form, you'll see the following options:

    • Name - the name of the blog category (mandatory).

    • Friendly URL - the blog category friendly url that will be used as a link to the category in the "Friendly URL" mode (mandatory).

    • Short description - brief description of the blog category.

    • Full description - ample description of the blog category.

    • Meta Keywords - keywords that will be used by search engines for better SEO optimization.

    • Meta Description - description of your blog category used by search engines for better SEO optimization.

    • Image - upload the image from your computer.

    • Image thumbnail - upload a smaller version of the blog category image.

    • Group access - custom groups that can have the access to this category.

    • Badge - enter the badge which will unify the category on the list.

    • Status - enable/disable the category.

  • Click the 'Save' button and your category will appear in the list of available categories.

  • In order to make changes to category, click the 'Edit' (1) button. In order to remove the category, click the 'Delete' (2) button below the 'Edit' button.

Posts

  • In your admin panel, under JX Blog section, choose Posts menu (1). To create a new post, press 'plus' (2) button in the top right corner.

  • Set the following options in the form that appears:

    • Post name - the title of the post (mandatory).

    • Friendly URL - the blog category friendly url that will be used as a link to the category in the "Friendly URL" mode (mandatory).

    • Short description - brief description of the blog category.

    • Full description - ample description of the blog category.

    • Meta Keywords - keywords that will be used by search engines for better SEO optimization.

    • Meta Description - description of your blog category used by search engines for better SEO optimization.

    • Post image - upload the image of the post (only .jpg format is allowed).

    • Post thumbnail - upload the smaller version of the blog post image (only .jpg format is allowed).

    • Status - enable/disable the post.

    • Associated categories - the category, your post will be associated to (mandatory).

    • Post tags - post tags to be included.

    • Publishing date - specify the publishing date of the post.

    • Related posts - add the related posts.

    • Related products - add the related products.

  • Click the 'Save' button to save the settings. Now, your newly created post will appear in the list of posts.

  • If you need to make some changes with the post, click the 'Edit' button (1) next to the needed post. To remove the post, click the 'Delete' (2) button.

Featured Posts

  • In your admin panel, under JX Blog section, choose Featured Posts menu (1). To create a new post, press 'plus' (2) button in the top right corner.

  • Set the following options in the form that appears:

    • Select post - choose the post(s) to be featured.

    • Set item position - choose the position of the featured posts on the homepage.

    • Status - enable/disable the featured posts.

  • Click the 'Save' button to save the settings. Now, the chosen posts will appear in the list of featured posts on the Homepage.

  • If you need to make some changes with the featured post, click the 'Edit' button (1) next to the needed post. To remove the post, click the 'Delete' (2) button.

Images Manager

If you need to optimize website images or upload image files for your blog, in JX Blog section go to 'Images Manager' (1) section.

In Images Manager (1) section you may add additional image types with specific dimensions that will be used in your blog posts and customize them according to your needs.

  • To add a new image type, press 'plus' (1) button in the Images Manager section.

  • Set the following options:

    • Name - the title of the image type (mandatory).

    • Width - image type width in pixels (mandatory).

    • Height - image type height in pixels (mandatory).

    • Categories - enable/disable this type for Blog categories images.

    • Categories Thumbnails - enable/disable this type for Blog categories thumbnails images.

    • Posts - enable/disable this type for Blog posts images.

    • Post Thumbnails - enable/disable this type for Blog posts thumbnails.

    • Blog users - enable/disable this type for not registered Blog users.

Regenerate Images

In Regenerate images section you can generate new sizes for all previously uploaded images or you can choose the particular type of the images you want to generate from the drop-down list.

Default Images

In Default Images section, you may set the following settings:

  • Default image - upload default image.

  • Categories default image - upload default image for categories.

  • Categories thumbnails default image - upload default image for categories thumbnails.

  • Post default image - upload default image for posts.

  • Post thumbnail default image - upload default image for posts thumbnails.

  • Users default image - upload default image for users.

  • Administrator icon - upload the administrator icon that will be displayed in the comments.

  • Registered users icon - upload the icon for registered users that will be displayed in the comments.

  • Unregistered users icon - upload the icon for unregistered users that will be displayed in the comments.

Comments

You can stay in touch with your customers using JX Blog Comments module. In Comments section, you can see the comments from your customers or site visitors, reply on them, edit or delete them.

Settings

Main settings

You can manage the main settings for blog functionality.

You may set the following options:

  • Image regeneration - generate new sizes for images automatically after each changing.

  • Display author - display the author of the post on the frond-end.

  • Display views - show the post views.

  • Items per page - the amount of items that will be displayed in listings.

'Posts to post' settings

The block is displayed on the post single page and is used to display the related posts.

Settings:

  • Number of visible related posts - number of related posts shown in the block.

'Products to post' settings

The block is displayed on the post single page and is used to display the related products.

Settings:

  • Number of visible related products - number of related products shown in the block.

Comments settings

  • Who can read comments? - choose which categories of the users will be able to read comments from your blog.

  • Who can leave comments? - choose which categories of the users will be able to leave comments in your blog.

  • Moderation - choose who can leave comments without moderation.

  • Replying - choose who can reply to other comments.

  • Voting - choose who can vote for other comments.

  • Editing - choose from the drop-down list who can edit its own comments.

  • Editing confirmation - choose who can edit own comments without moderation.

  • Deleting - from the drop-down list choose who can delete its own comments.

  • Deleting comments with replies - choose who can delete its own comments which have replies.

  • Attachments - choose who can add attachments to comments.

  • Hashtags - choose who can use hashtags in comments.

  • Pinging - choose who can mention users in comments.

  • Navigation - choose who can see navigation above the comments block.

  • Post on enter - enable/disable the possibility to post a comment by pressing "Enter" button.

JX Category Products 2.0.0

This module displays category products in displayHome and displayHomeTabContent hooks. The module allows displaying single products, products from a category or all products. Moreover, the module comes with a carousel that works, when the module occupies the displayHome position.

JX Category Products Main Panel

The main panel. Here you can set up the module.

Adding a block

This block allows selecting products in displayHome position.

  • Access the module main panel and press the 'plus' (1) button in the blocks list.

  • In the appeared form, you'll find the following options:

    • Status - this option allows enabling/disabling the block.

    • Select category - the category, products of which will be displayed.

    • Use name in font - this option allows changing the displayed category name. If enabled, displays the following form:

      • Name - the custom tab name, displayed on the website.

    • Select products to display - if disabled, displays the 'Number of products to display' field, which sets the number of products to display. If disabled, displays the 'Add products' button that allows selecting products to display in the tab.

    • Use carousel - this option allows enabling/disabling the carousel for block products. After enabling the option, you'll see the following settings:

      • Visible items - the number of visible items.

      • Items scroll - the number of items changed with one carousel scroll.

      • Slide Width - the carousel list item width.

      • Slide Margin - the carousel list item margin.

      • Auto scroll - auto scroll of carousel items.

      • Carousel speed - speed of changing items.

      • Pause - pause between scrolls (if "Auto scroll" is enabled).

      • Random - the carousel starts with a random item.

      • Carousel loop - the loop: when all the carousel items have been displayed, carousel starts from the beginning.

      • Hide control on end - hide control buttons (Next/Prev).

      • Pager - display pagination.

      • Control - display controls (Next/Prev).

      • Auto control - display controls (Play/Pause).

      • Auto hover - carousel pauses, if the user hovers a list item.

  • After configuring all the needed options, press the 'Save' (2) button.

Blocks Sorting

You can sort the blocks of the module with the help of drag'n'drop. This allows to change blocks positions quickly.

Selecting Products

If you create an item and enable 'Select products to display' option, you can choose the products that you want to display. To do this:

  • Press the 'Add products' (1) button:

  • In the appeared pop-up, select the needed products (2) and press the 'Add' (3) button:

  • Now, you can place the added products wherever you want with the help of drag'n'drop (4):

  • When all the needed products are added and arranged in the desired order, press the 'Save' button.

Deleting Blocks

To delete items, press the drop-down menu next to the needed block (1) and press delete (2). The item will be deleted.

JX Compare Product

This module allows you to compare products.

Product comparison as a feature allows comparing two, three or more products at a time.

Installation and Deleting

The module can be installed and deleted like any other PrestaShop module.

Module Settings

The main panel. Here you can set up the following options of the module:

  • Count product - the amount of products to be compared.

  • Display in footer - the ability to display the feature in footer area.

  • Display in header info - the ability to display the feature in header area of the page.

JX Deal of the Day

This module allows you to display the list of products with the discount countdown timer. You can also add a timer to products in the home page tabs, on the category pages and single product pages.

Installation and Deleting

The module is installed and removed the same way as any other PrestaShop module.

Module Settings

After module installation you can add a product discount with the display period and a discount countdown timer.

Adding/removing/editing blocks
  • In order to add a new product, press 'Add new' button

    • Select a product - select a product to apply the discount and display a timer.
    • Status - item status.
    • Start Date - start date of the product discount period.
    • End Date - end date of the product discount period.
    • Label - product label.
    • Discount price - discount price (absolute or percentage value).
  • After saving the item it appears in the list of items of this type.

  • In order to edit this item, press 'Edit' button.

  • In order to remove this item, press 'Delete' button.

  • If a special price valid for a certain period was set to the product previously, this product can be added to the module items list.

Product display configuration
  • In order to change product display mode, press 'Configuration' button.

  • Then a form with product display configuration will appear.

    • Products to display - number of products to display in the home page block.
    • Random products - random products display.

JX Google Map

This module allows adding Google Map with store locations and store short descriptions to the Homepage. The map will display the addresses of all the stores connected with your online store.

Installation and removal

The module is installed and removed as any other PrestaShop module.

Module settings

After installing the module, you can add stores to the map. After pressing the 'Add new store' button (1), you'll be redirected to the 'Store contacts' tab, where you can edit your stores.

To add a new store, press the 'Add new' button.

  • Select a store - select the store that you want to add to the map.
  • Status - the element status.
  • Marker - adding a custom marker.
  • Custom text - adding custom text.
Google Map display settings

  • Google Api Key - enter your Google Map API Key.
  • Map Style - select the map display style.
  • Map Type - select the map display type.
  • Zoom Level - specify the initial level of the map zoom (from 1 to 17).
  • Zoom on scroll - enable/disable map zoom on scroll.
  • Map controls - enable/disable map controls.
  • Street view - enable/disable street view.
  • Animation marker - enable/disable animation marker.
  • Popup - enable/disable popup windows with store information.

JX Header Account 2.1.0

This module displays login and registration forms on the website. It can take the following positions: website header, left and right column. The module allows to log in and register using such social networks as Facebook, Google+ and VK, which is convenient for website users. Registration or logging in proceeds without reloading the page.

The module is compliant with official PrestaShop General Data Protection Regulation (GDPR) module, a new EU legal framework that governs how users' personal data is used.

JX Header Account Main Panel

The main panel. Here you can set up the module.

Settings

There are the following settings in the module:

  • Display type - this setting allows to select the way to display the registration form. It can take the following values:

    • Drop-down - the form will display as a drop-down below the button opening it.
    • Popup - the form will appear in a pop-up.
    • Left side - the form will appear from the left as a sidebar.
    • Right side - the form will appear from the right as a sidebar.
  • Display style after login - this setting allows to change the form view after login/registration. You can use the following values:

    • Two columns - the list is divided into two columns.
    • One Column - the list of links is displayed as one column.
  • Default avatar - this field appears only if the 'Display avatar' option is enabled. Here you can select the default user avatar.
  • Display avatar - this setting allows to enable or disable user avatar. If the user logs in to the account on the website with the help of one of the social networks, the avatar will be taken from the account in this social network, otherwise, the avatar, loaded by the website admin, will be displayed.
  • Use redirect - if this setting is enabled, user registration and password recovery will take place on the default PrestaShop registration/password recovery page.
  • Use Facebook Login - this setting allows enabling user registration and login with the help of the Facebook social network. When you enable this option, you will see the following settings:

    • App ID - your account App ID from the Facebook developer account.
    • App Secret - your app secret from the Facebook developer account.
  • Use Google Login - this setting allows enabling user login and registration with the help of the Google+ social network. If you enable this option, you will see the following settings:

    • App ID - your App id from the Google developer account.
    • App Secret - your App secret from the Google developer account.
    • Redirect URLs - your online-store url + index.php?fc=module&module=jxheaderaccount&controller=googlelogin
  • Use VK Login - this setting allows enabling user registration and login with the help of VK social network. If you enable this option, you will see the following settings:

    • App ID - your App id from your VK developer account.
    • App Secret - App secret from your VK developer account.
    • Redirect URLs - your online-store url + index.php?fc=module&module=jxheaderaccount&controller=vk
Registering apps in social networks:

JX Look Book

Requirements:

This module allows creating lookbooks and combining them to collections. In their turn, lookbooks allow viewing the products directly on the model. Also, if a product is marked in the lookbook, the module displays the lookbook link on the product page.

  • PHP 5.4+
  • PrestaShop 1.7
JX Look Book Main panel

On the main page of the module, you can delete and edit the module collections. Also, you can add, delete and edit blocks, that the module will display on the Homepage.

Adding and editing the collection

Collections allow combining several lookbooks on one page. To add a collection, follow the next steps.

  • In the collections table (the main module panel) click on the plus (1).

  • You will see a form with the next fields:

    • Status - this option allows to disable or enable the collection display on the collections page.
    • Name - the name of the collection that will be displayed on the collections page.
    • Description - the collection description.
    • Image - the main collection image.
    • Template - the template for the lookbooks of this collection. When you select a template, you select the way the lookbooks of this collection will be displayed on the page.
  • After having filled all the fields, press the 'Save' (2) button.

  • The collection has been created. You can edit it by pressing the 'Edit' (3) button, or you can proceed to the next step and create lookbooks for the collection.

Creating and editing lookbooks
  • After creating a lookbook, press the 'View' (1) button next to the needed collection.

  • In the appeared block press the '+' button (2).

  • You'll see a form with the following options:

    • Status - the lookbook status, the option defines whether the lookbook will be displayed.
    • Name - the name of the look.
    • Description - the description of the look.
    • Image - the main image of the look, here you can mark the products and descriptions.
  • After filling in all the fields, press the 'Save & Stay' (3) button to continue creating hotspots.

Adding and Editing Hotspots

After having saved the lookbook, you can add the hotspots.

  • Press the image (in the needed point) (1) in the lookbook form.

  • You will see a form with the following settings:

    • Type - this is the point type, it has two values 'Product' and 'Content'. The product type allows to select a product that will be attached to the point, and content type allows to add content (name, description, HTML) to the point.
    • Product - selecting a product for the point. It appears if the selected type is 'Product'.
    • Name - the name attached to the point. This field is available, only if the type 'Content' is selected.
    • Description - the point description or coding. Available only if the type 'Content' is selected.
  • After having selected the needed options, press the 'Save' (2) button, hotspot will be created and displayed on the page.

Deleting a hotspot
  • To delete a point, hover over it (1).

  • You'll see a button with a cross, press it (2).

  • The point is deleted.

Changing the hotspot position

To change the point position, drag and drop it to the needed position.

Available positions of the module
  • The module can be displayed in 4 positions:

    • Displaybeforebodyclosingtag - display module at the bottom of the page;

    • Displayhome - display the module on the home page;

    • Displayproductadditionalinfo - the hook adds the additional information on the product page;

    • Displaytopcolumn - display module at the top of the page.

Adding a new block
  • To add a new block, enter the module main panel, choose the tab with the needed hook (1) and click the '+' (2).

  • In the appeared form, set up the following options:

    • Status - the block status. This setting allows to enable or disable the block display.
    • Type - allows to select the block type.
    • Page - allows to select a previously selected page.
  • After setting up all options, press the 'Save' (2) button.

After the new block is created, it will be displayed on the Homepage.

JX Manufacturers Block

This module shows up manufacturers available in your store. The list of manufacturers may consist of image and title. The list can also show up as a carousel.

Installing and Deleting

The module is installed and deleted like any other PrestaShop module.

Module configuration

After installation you can change its settings on the module configuration page.

  • Order by
    type of sorting items of the block.
  • Display name
    show the manufacturer's name.
  • Display image
    show the image of the manufacturer.
  • Number of elements to display
    type the number of elements displayed in the module.
  • Image Type
    select the image type (you can select the image from the images related to the manufacturer).
  • Use carousel
    show up the list as a carousel.
  • * Visible items
    number of visible manufacturers.
  • * Items scroll
    number of manufacturers shown in one carousel scroll.
  • * Slide Width
    the width of the element in the carousel.
  • * Slide Margin
    the margin of the element in the carousel.
  • * Auto scroll
    automatic scrolling.
  • * Carousel speed
    speed of the carousel.
  • * Pause
    pause between scrolls (if "Auto scroll" is enabled).
  • * Carousel loop
    carousel returns to the beginning when all elements have been scrolled.
  • * Hide control on end
    hide next/previous buttons.
  • * Pager
    show pagination.
  • * Control
    show next/previous buttons.

* - settings are available only if carousel is enabled.

After all options have been set, press 'Save' button (1).

The module supports multi-stores.

JX Mega Layout 1.4.0

The module allows building multiple homepage layouts (presets) for hooks. This module advantage is allowing you to create different hook markups and modify them up to your needs.

Module requirements

  • PrestaShop 1.7+

  • PHP 5.4+

Hooks

The module has 5 hooks available by default:

  • 'Header' is a hook that combines such standard hooks: displayTop, displayNav, displayNav1, displayNav2. This hook corresponds to the website header.
  • 'Top Column' corresponds to the displayTopColumn and displayNavFullWidth hooks. This hook comes right after the Header hook.
  • 'Home' corresponds to such hooks: displayHome, displayWrapperTop, displayWrapperBottom, displayContentWrapperTop, displayLeftColumn, displayRightColumn. This hook is present only on the main page.
  • 'Footer' corresponds to the displayFooterBefore, displayFooter and displayFooterAfter hooks.
  • 'Product Footer' corresponds to the original displayFooterProduct hook, which is displayed in product page footer.

Integrating module to the theme

Integrating module to the THIRD-PARTY theme your presets won't be displayed at the frontend without this step.

NOTE: for third-party sources only if JX Mega Layout module is not included by default. The codes below have already been integrated into ZEMEZ template.

  • Header. In order to add custom preset to the Header hook, you need to perform the following steps:

    • Open the /templates/_partials/header.tpl file for editing.
    • Locate the following code:
         {block name='header_banner'}
          <div class="header-banner">
                  {hook h='displayBanner'}
                </div>
        {/block}
      
        {block name='header_nav'}
          <nav class="header-nav">
            <div class="container">
              <div class="row">
                <div class="hidden-sm-down">
                <div class="col-md-5 col-xs-12">
                  {hook h='displayNav1'}
                </div>
                <div class="col-md-7 right-nav">
                  {hook h='displayNav2'}
                </div>
              </div>
              <div class="hidden-md-up text-sm-center mobile">
              <div class="float-xs-left" id="menu-icon">
              <i class="material-icons d-inline"></i>
                          </div>
              <div class="float-xs-right" id="_mobile_cart"></div>
                          <div class="float-xs-right" id="_mobile_user_info"></div>
                          <div class="top-logo" id="_mobile_logo"></div>
                          <div class="clearfix"></div>
                          </div>
              </div>
            </div>
          </nav>
        {/block}
      
      {block name='header_top'}
          <div class="header-top">
            <div class="container">
              <div class="row">
                <div class="col-md-2 hidden-sm-down" id="_desktop_logo">
                  <a href="{$urls.base_url}">
                    <img class="logo img-responsive" src="{$shop.logo}" alt="{$shop.name}">
                  </a>
                </div>
                <div class="col-md-10 col-sm-12 position-static">
                  {hook h='displayTop'}
                  <div class="clearfix"> </div>
                          </div>
              </div>
              <div id="mobile_top_menu_wrapper" class="row hidden-md-up" style="display:none;">
              <div class="js-top-menu mobile" id="_mobile_top_menu"> </div>
                         <div class="js-top-menu-bottom">
                          <div id="_mobile_currency_selector"></div>
                          <div id="_mobile_language_selector"></div>
                          <div id="_mobile_contact_link"></div>
             </div>
           </div>
           </div>
          </div>
          {hook h='displayNavFullWidth'}
        {/block}
      
    • And replace it with:
       {assign var='displayMegaHeader' value={hook h='jxMegaLayoutHeader'}}
       {if $displayMegaHeader}
        {$displayMegaHeader nofilter}
        {else}
        {block name='header_banner'}
           <div class="header-banner">
            {hook h='displayBanner'}
          </div>
        {/block}
      
        {block name='header_nav'}
           <nav class="header-nav">
             <div class="container">
               <div class="row">
                 <div class="hidden-sm-down">
                  <div class="col-md-5 col-xs-12">
                 {hook h='displayNav1'}
                 </div>
                 <div class="col-md-7 right-nav">
                  {hook h='displayNav2'}
                   </div>
             </div>
                          <div class="hidden-md-up text-sm-center mobile">
               <div class="float-xs-left" id="menu-icon">
               <i class="material-icons d-inline"> </i>
               </div>
               <div class="float-xs-right" id="_mobile_cart"></div>
                          <div class="float-xs-right" id="_mobile_user_info"></div>
                          <div class="top-logo" id="_mobile_logo"></div>
                          <div class="clearfix"></div>
              </div>
             </div>
           </div>
           </nav>
        {/block}
      
        {block name='header_top'}
          <div class="header-top">
            <div class="container">
              <div class="row">
                <div class="col-md-2 hidden-sm-down" id="_desktop_logo">
                  <a href="{$urls.base_url}">
                    <img class="logo img-responsive" src="{$shop.logo}" alt="{$shop.name}">
                  </a>
               </div>
                          <div class="col-md-10 col-sm-12 position-static">
                  {hook h='displayTop'}
                  <div class="clearfix"></div>
                </div>
              </div>
                <div id="mobile_top_menu_wrapper" class="row hidden-md-up" style="display:none;">
              <div class="js-top-menu mobile" id="_mobile_top_menu"></div>
               <div class="js-top-menu-bottom">
               <div id="_mobile_currency_selector"></div>
               <div id="_mobile_language_selector"></div>
                <div id="_mobile_contact_link"></div>
            </div>
          </div>
          </div>
          </div>
          {hook h='displayNavFullWidth'}
        {/block}
        {/if}
  • Top column. In order to add custom preset to the topColumn hook, you need to perform the following steps:

    • Open the /templates/_partials/header.tpl file for editing.
    • Locate the following code
      {hook h="displayNavFullWidth"}
    • And replace it with:
          {assign var='displayMegaTopColumn' value={hook h='jxMegaLayoutTopColumn'}}
              {if $displayMegaTopColumn}
                  {$displayMegaTopColumn nofilter}
                   {/if}
                      
  • Home. In order to add custom preset to the Home hook, you need to perform the following steps:

    • Open the /templates/layouts/layout-both-columns.tpl file for editing.
    • Locate the following code:
      <section id="wrapper">
         {hook h="displayWrapperTop"}
               <div class="container">
          {block name="breadcrumb"}
          {include file='_partials/breadcrumb.tpl'}
          {/block}
      
          {block name="left_column"}
            <div id="left-column" class="col-xs-12 col-sm-4 col-md-3">
            {if $page.page_name == 'product'}
            {hook h='displayLeftColumnProduct'}
        {else}
           {hook h="displayLeftColumn"}
           {/if}
            </div>
          {/block}
      
           {block name="content_wrapper"}
             <div id="content-wrapper" class="left-column right-column col-sm-4 col-md-6">
             {hook h="displayContentWrapperTop"}
            {block name="content"}
              <p> Hello world! This is HTML5 Boilerplate.</p>
            {/block}
         {hook h="displayContentWrapperBottom"}
           </div>
         {/block}
      
          {block name="right_column"}
             <div id="right-column" class="col-xs-12 col-sm-4 col-md-3">
             {if $page.page_name == 'product'}
             {hook h='displayRightColumnProduct'}
         {else}
             {hook h="displayRightColumn"}
             {/if}
            </div>
          {/block}
           </div>
         {hook h="display wrapperBottom"}
      </section>
                      
    • And replace it with:
          <section id="wrapper">
            {assign var='displayMegaHome' value={hook h='jxMegaLayoutHome'}}
             {if $page.page_name == 'index' && $displayMegaHome}
             {$displayMegaHome nofilter}
            {else}
      
             {hook h="displayWrapperTop"}
             <div class="container">
             {block name="breadcrumb"}
              {include file='_partials/breadcrumb.tpl'}
             {/block}
      
             {block name="left_column"}
              <div id="left-column" class="col-xs-12 col-sm-4 col-md-3">
              {if $page.page_name == 'product'}
               {hook h='displayLeftColumnProduct'}
             {else}
               {hook h="displayLeftColumn"}
             {/if}
             </div>
             {/block}
      
             {block name="content_wrapper"}
               <div id="content-wrapper" class="left-column right-column col-sm-4 col-md-6">
               {hook h="displayContentWrapperTop"}
               {block name="content"}
                 <p>Hello world! This is HTML5 Boilerplate.</p>
             {/block}
               {hook h="displayContentWrapperBottom"}
              </div>
             {/block}
      
             {block name="right_column"}
               <div id="right-column" class="col-xs-12 col-sm-4 col-md-3">
               {if $page.page_name == 'product'}
                 {hook h='displayRightColumnProduct'}
               {else}
                 {hook h="displayRightColumn"}
               {/if}
              </div>
              {/block}
            </div>
              {hook h="displayWrapperBottom"}
            {/if}
        </section>
      
  • Footer. In order to add custom preset to the Footer hook, you need to perform the following steps:

    • Open the /templates/layouts/layout-both-columns.tpl file for editing.
    • Locate the following code:
         {block name="footer"}
      {include file="_partials/footer.tpl"}
      {/block}
      
    • And replace it with:
        {assign var='displayMegaFooter' value={hook h='jxMegaLayoutFooter'}}
      {if $displayMegaFooter}
      {$displayMegaFooter nofilter}
      {else}
      <div class="container">
      {block name="footer"}
      {include file="_partials/footer.tpl"}
      {/block}
      </div>
      {/if}
      
  • Product footer. In order to add custom preset to the Product footer hook, you need to perform the following steps:

    • Open the /templates/catalog/product.tpl file for editing.
    • Locate the following code:
      {block name='product_footer'}
            {hook h='displayFooterProduct' product=$product category=$category}
          {/block}                                 
    • And replace it with:
       {block name='product_footer'}
         {assign var='displayMegaProductFooter' value={hook h='jxMegaLayoutProductFooter' product=$product category=$category}}
         {if $displayMegaProductFooter}
          {$displayMegaProductFooter nofilter}
        {else}
          {hook h='displayFooterProduct' product=$product category=$category}
         {/if}
        {/block}
          

Module configuration

After JX Mega Layout module installation, you can configure it by clicking the Configure button (2).

JX Mega Layout Main Panel

Main Layouts

The main JX Mega Layout module configuration panel allows you to add a preset to the required hook and configure the preset.

Adding the preset
  • Press '+ Add a Preset' (1) in the needed tab.

  • Next, fill in the 'Enter layout name' field in the popup typing the new preset (2) title there and press 'Save' (3).

  • Preset was successfully created, it's listed among the available presets (4) now. Newly created preset is selected for editing (5).

Preset activation
  • First of all, select the needed preset from the list (1).

  • Press the 'Use as default' (2) switcher.

  • The preset was activated. If you need to display this preset only on some pages, open the drop-down (3) and select the pages you need. To apply changes, click outside the list area. A preset that is displayed on all pages will be marked with a filled star in the presets list, and the one that is displayed only on some pages will be marked with a partially filled star.

Removing the preset

There is no option to restore the preset after removing.

  • In order to remove the preset, choose the required preset among the list (1).

  • Next, press a cart (2) near the preset title.

  • Preset was successfully removed.

Renaming the preset
  • In order to rename the preset, choose the required preset among the list (1).

  • Next, press a pencil icon (2) next to the preset title.

  • Specify the new preset title (3) in a popup and press 'Rename layout' (4).

  • Preset was successfully renamed.

Wrapper

Wrapper has no class by default, it's not a mandatory item.

Adding the wrapper
  • In order to create a wrapper, press '+ Add wrapper' (1).

  • Wrapper was added (2).

Adding the custom CSS class to the wrapper

Adding the custom class will let you create a specific styling for your wrapper by using CSS rules.

  • In order to add wrapper class, press the button (1).

  • You'll see a pop-up window, fill in the 'Enter wrapper classes' (2) field there and press a 'Confirm' (3) button.

  • Custom class was added successfully.

Deleting the wrapper

Deleting the preset item will also cause all of its child items and their styles removing.

  • In order to remove the wrapper, press the cart button (1).

  • Wrapper was removed successfully.

Styling the wrapper
  • In order to add custom styles to the wrapper, press the 'pencil' (1) icon in the wrapper block.

  • In the following pop-up window fill in all the needed fields (you may refer to the documentation 'Styling' section), and press 'Save' (2) button.

  • If all the fields are filled in correctly, styles will be saved.

Row

Row item from the Bootstrap grid. It's a required item.

Adding the row
  • In order to insert a new row, press '+ Add row' (1) into the wrapper block, or '+ Add row' (2) in the main preset block, or '+ Add row' (3) in the column drop-down list.

  • The row was added successfully.

Adding custom CSS class to the row

Custom class adding allows you to create custom row styling using CSS rules.

  • In order to add the class to the row, you should press the 'ellipsis' button (1).

  • Choose the 'Edit row' (2) in a drop-down list.

  • Fill in the 'Enter row classes' (3) field in the pop-up window and press 'Confirm' (4) button.

  • Custom class was added successfully.

Deleting the row

Removal of preset item will also cause removal of its child items and their styles.

  • In order to remove the row, open the menu (the 'ellipsis' icon) in the row block.

  • Choose 'Delete' (2) option in the drop-down.

  • The row was successfully removed.

Adding styles to the row
  • In order to add row styles, open the menu (the 'ellipsis' icon) (1) in a row block.

  • Press 'Stylize' (2) in the drop-down.

  • You will see the pop-up window, fill in all the needed fields there (you may refer to the documentation 'Styling' section) and press 'Save' (3) button.

  • If all the fields are filled in correctly, styles will be saved.

Column

It is an item with configurable block width for different dimensions, based on Bootstrap grid.

Adding the column
  • In order to insert a column into a needed 'row', open the menu (the 'ellipsis' icon) (1)

  • Choose the '+ Add Col' (2) among the list.

  • Fill in the fields (col*, col-sm*, col-md*, col-lg*, col-xl*, col-xxl* - in accordance with bootstrap 4 requirements) in the pop-up window and press 'Confirm' (3) button.

  • The column was added successfully.

Removing the column

Preset item removing will also cause its child items and their styles deleting.

  • In order to remove the column, open the menu (the 'ellipsis' icon) in a column block (1)

  • Press 'Delete' (2) in the list.

  • The column and all of its child items were removed.

Editing the column
  • In order to edit the column, open the menu (the 'ellipsis' icon) (1) in the column block.

  • Press 'Edit column' (2) in the list.

  • Fill in the fields (col*, col-sm*, col-md*, col-lg*, col-xl*, col-xxl* - in accordance with bootstrap 4 requirements) in the pop-up window and press 'Confirm'.

  • The column was successfully edited.

Adding styles to the column
  • In order to add column styles, open the menu (the 'ellipsis' icon) (1) in a column block.

  • Press 'Stylize' (2) in the list of options.

  • You will see the pop-up window, fill in all the needed fields there (you may refer to the documentation 'Styling' section) and press 'Save' (3) button.

  • If all the fields are filled in correctly, styles will be saved.

Module

Module assigned to this hook.

Adding the module

Be careful when adding modules to the preset, some modules are desirable to use if they do not change the visible layout, e.g., 'Data mining for statistics' module.

  • In order to add the module to the preset in a column block, open the menu (the 'ellipsis' icon) (1).

  • Press the '+ Add Module' (2) in the list of options available.

  • If needed, you can enter the custom class (3) in the pop-up window and select the module (4), next press 'Confirm' (5).

  • The module was successfully added.

  • In this version of JX Mega Layout you can add 'Homepage tabs' module in Home hook.

    It can also be customized like all other modules in Mega Layout.

Deleting the module

Removal of preset item will also cause removal of its child items and their styles.

  • In order to remove the module, open the menu (the 'ellipsis' icon) (1) in the module block.

  • Press 'Delete' (2) in the list of options available.

  • The module is removed.

Adding custom class to the module

Custom class adding allows to create module styling using CSS rules.

  • In order to specify custom class for the module, open the menu in the module block (the 'ellipsis' icon) (1).

  • Press 'Edit Settings' (2) then.

  • Specify custom class (3) in the pop-up window and press 'Confirm' (4) button.

  • Custom class was added.

Extra content

Additional custom content in any position.

Adding extra content
  • In order to add extra content in a column block, open the menu (the 'ellipsis'icon) (1).

  • Press 'Add Extra content' (2).

  • The pop-up window will appear. Specify the custom class (3), if needed. You need to select the content type (product or post) (4) and identify product ID number (5). Press 'Confirm' (6) button.

  • Extra content was successfully added.

Deleting extra content
  • To remove the extra content, open the menu (the 'ellipsis' icon) (1) in the corresponding block.

  • Press 'Delete' (2) button.

Adding custom class to the extra content
  • In order to add the custom class for the extra content, open the menu in the corresponding block (the 'ellipsis' icon) (1).

  • Press 'Edit settings' (2) button.

  • Specify the custom class in the appeared pop-up window. Press 'Confirm' button.

  • Custom CSS class was added.
Logo, Copyright

Logo and Copyright blocks are edited the same way as modules, except for the fact that Logo can be placed only in Header or Footer position, and the Copyright block can be placed only in Footer position.

Presets export

Export tool allows you to export presets for the further import into different shops.

  • Navigate to the 'Tools' (1) tab in the main configurations panel.

  • Choose 'Export' (2) in the form.

  • You'll see the list of the existing presets in site hooks.

  • In order to preview the preset, press 'Layout preview' (3) button next to the preset you need, in order to export, please press 'Export layout' (4) button.

  • Then you'll be able to download this preset as a zip archive.

Preset import

Import tool accepts only the presets *.zip files that were previously generated with the same module Export tool.

  • In order to import your preset, you should open the Tools (1) tab and choose 'Import' (2).

  • Next, press the Add file (3) button and select the zip file of your exported preset. In case this archive is the exported preset, you will see this preset preview.

  • If this preset meets your needs, press 'Import' (4). The preset will be imported and added to the list of available presets.

Reset

'Reset' reverts all the presets to initial state (to the way they came with the template), and discards all the created presets.

Attention! After reverting presets to default state, all the custom presets will be discarded!

  • To reset presets, navigate to the 'Tools' (1) tab. In the appeared block open the 'Options' (2) tab.

  • Press the 'Reset' button.

  • That's it! All presets are reset to initial state.

Styles and Scripts Optimization

Styles and scripts optimization adds exclusions for modules in Header section, based on their use in presets. This allows speeding up the page loading speed. Optimization works in test mode.

Enabling optimization:

  • To enable optimization, open the 'Tools' (1) tab and select the 'Options' (2) tab.

  • In the appeared window, you can enable optimization (3).

If optimization is enabled when editing and enabling presets, optimization gets discarded, but you'll see a window offering to run optimization. There is no need to optimize scripts and styles every time you change presets. It's better to optimize them when you're done editing.

Styling
  • Background styles. Fields description:

    • background-image (background image) - the image URL or 'none' value. The image is picked from the ~/images/cms/ folder.
    • background-color (background color) - the value can be set in any color format (rgb, hex, etc.). You can choose the color using the Color Picker tool.
    • background-repeat (background repeat) - all the available options are listed in the radio buttons.
    • background-position (background position) - all the available options are listed in the drop-down.
    • background-size (background size) - all the available options are listed in the drop-down.
    • background-origin (background image positioning region) - all the available options are listed in the drop-down.
  • Border styles.

    • border-top-style, border-right-style, border-left-style, border-bottom-style (border styles) - all the available options are listed in the drop-down.
    • border-top-width, border-right-width, border-left-width, border-bottom-width (borders width) - should be set in pixels.
    • border-top-сolor, border-right-color, border-left-color, border-bottom-color (borders color) - the value can be set in any color format (rgb, hex, etc.). You can choose the color using the Color Picker Tool.
    • border-top-right-radius, border-top-left-radius, border-bottom-right-radius, border-bottom-left-radius (border radius) - should be set in pixels.
  • Other styles.

    • box-shadow (box shadow) - example:0px 0px 0px 0px rgba(0,0,0,0.75).
Items styles removing
  • In order to remove items styles, open the items styling section and press 'Clear styles' (1)

Extra content

On the module base there is the ability to create one of the available content types (HTML block, Banner block, YouTube block or Slider block) blocks and, also, output the products or posts as slides. You can also Export all the extra content you have created in one click only or import it from your computer.

  • In order to add extra content, you should open the Tools (1) tab and choose 'Extra content' (2.)

  • Press 'Add content' button.

  • There are 4 available types of content that you can create: HTML block, Banner block, Video block, Slider block.

Extra HTML content
  • To create extra HTML content, press 'Create HTML block' tab.

  • In the form that appears, fill in the required fields.

    • Enter HTML item name
      HTML block name, is mandatory to be filled in for the default language.
    • HTML content
      HTML content.
    • Enter Specific Class
      block CSS class.
  • To delete HTML block, press 'Remove' (1) button. In order to edit block, press 'Edit'(2) button.

Extra Banner content
  • To create extra Banner content, press 'Create Banner block' (1) tab.

  • In the form that appears, fill in the required fields.

    • Enter Banner item name
      banner title, is mandatory to be filled in for the default language.
    • Enter Banner item link
      a link that is assigned to this banner.
    • Add banner image
      upload an image for the banner.
    • Banner content
      set the content of the banner.
    • Enter Specific class
      block CSS class.
  • To delete Banner block, press 'Remove' (1) button. In order to edit block, press 'Edit'(2) button.

Extra Video content
  • In order to create extra Video content, press 'Create Video block' (1) tab.

  • In the form that appears, fill in the required fields.

    • Enter Video item name
      the title of the video (mandatory).
    • Preview
      the video will be displayed before it will be published.
    • Enter Video item URL
      add video link in the YouTube video format.
    • HTML content
      the field where some HTML content can be added.
    • Enter Specific Class
      block CSS class.
  • To delete Video block, press 'Remove' (1) button. In order to edit block, press 'Edit'(2) button.

Extra Slider content
  • In order to create extra Slider content, press 'Create Slider block' (1) tab.

  • In the form that appears, fill in the required fields.

    • Enter Slider item name
      the title of the slider (mandatory).
    • Slider description
      set the description of the slider.
    • Enter Specific class
      block CSS class.
    • Slides
      the content of the slide: html, banner, video, product, post.
    • Visible items
      the number of visible items (mandatory).
    • Items scroll
      the number of items changed with one scroll (mandatory).
    • Slide margin
      the carousel list item margin (mandatory).
    • Slider speed
      speed of changing speed (mandatory).
    • Auto scroll
      turns on/off slider autoplay.
    • Pause
      pause between scrolls (if 'Auto scroll' is enabled).
    • Slider Loop
      allow repeating slides from the beginning after all the slides were shown.
    • Pager
      show/hide slider pagination.
    • Controls
      show/hide slider navigation.
    • Auto height
      slides height.
  • To delete Slider block, press 'Remove' (1) button. In order to edit block, press 'Edit'(2) button.

Export content

You may export all the extra content you've created to your computer as a zip file with one click only.

  • To download extra content, simply press "Export content"(1) tab. The downloading process will start automatically.

Import content

You can also import your own custom content from your computer, but zip files only!

  • To upload extra content, press "Import content" tab.

  • Press "Add file" (1) button and upload from your computer archive that contains extra content only.

Warnings

If the following message appears in the module item block, you should enable the mentioned module.

If the following message appears in the module item block, you should install the mentioned module.

In case you remove or deactivate the 'JX Mega Layout' module, all the active presets will be disabled and you will see the positions (hooks) in their original appearance.

JX Mega Menu

The module is designed to create complex menus. The module provides the ability to display one item (without sub-menu), a menu item with a sub-menu and a menu item with sub-menu by means of a multi-row and multi-column block. The module can be used in different positions, but it will display the same content. Available positions: top (displayTop), left (displayLeftColumn), right (displayRightColumn), footer (displayFooter). You can add categories (with subcategories), CMS categories (with subcategories), manufacturers (one or a list), suppliers (one or a list), stores (if multi-store is used), links to any product, information block about the product, custom links (not limited in quantity), custom HTML blocks (not limited in number) and banners. See below for more details.

The module includes 6 main tabs that allow customizing the menu.

JX Mega Menu Items

JX Mega Menu items are the basic items which appear in the menu.

In order to create a new item, open the JX Mega Menu module and click Add item button from the top menu or click "+" button in the top right of the table.

In the form that appears, fill in the required fields.
  • Enter item name
    the tab title which is mandatory to be filled in for the default language, if the additional languages fields are not filled in, the tab takes its name from the default language.
  • Active
    active/inactive tab.
  • Link
    a link that is assigned to this tab. You can enter a custom link, or choose from existing options (categories, CMS categories). If you leave the field blank, the link of this tab is inactive.
  • Sort order
    the order of tabs to be displayed.
  • Specific Class
    the class which is added to emphasize the item (CSS class).
  • Enter item badge
    is filled in depending on multi-languages.
  • It is Mega Menu
    given tab sub-menu is a Mega Menu. *
  • Use simple menu
    given tab sub-menu is a simple menu. **

* It is Mega Menu. If this option is selected, there will be a form to create a complex menu (Mega Menu).

** Use simple menu. If this option is selected, there will be a form to create a simple menu. This is a menu that displays the selected content in a single column. If the menu has embedded content, the new column is added.

Complex menu consists of rows and columns in rows.

The Row is a part of the Mega Menu structure. It includes the menu columns. The existing row can be removed by clicking the appropriate button. The row will be removed with the content it includes. The rows quantity is not limited.

The Column is a part of the Mega Menu structure, which is placed inside the rows. (The Class) The width of the column cannot be less than 2 and more than 12. In order to make the menu display properly, the total column width cannot exceed 12. The width (class) is a Bootstrap column type, corresponds to the same values.

In order to create the menu, click the 'Add row' button.

In the form appeared, click 'Add column' button.

In the pop up window you need to specify the column class (from 2 to 12). The column itself appears next where you need to set the required settings.

Here you can change the column class, CSS class and the content from the list provided. You can add/remove content by double clicking the item, or by highlighting the items and clicking the corresponding button.

Block can be removed by clicking 'Remove block' button in the footer of the block.

By removing the row, the included columns are also removed.

In order to move the content available in the selected menu, double-click or highlight the desired content and press the corresponding button.

Inactive menu information is saved while switching between menu types and you can always change the type of menu.

JX Mega Menu HTML

In this section we will explain how to create a custom HTML block in the Mega Menu.

The module has a table listing all the available blocks. You can also add a new block by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.
  • Enter HTML item name
    HTML block name, is mandatory to be filled in for the default language.
  • Specific class
    block's CSS class.
  • HTML content
    HTML content.

Added block will appear in the list of blocks, as well as in the list of available content while creating menu blocks.

JX Mega Menu Links

In this section we will show how to create custom links in the Mega Menu.

The module has a table listing all the available links. You can also add a new link by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.
  • Enter Link name
    link name, is mandatory to be filled in for the default language.
  • Enter Link URL
    link URL, is mandatory to be filled in for the default language.
  • Specific class
    block's CSS class.
  • Open in new window
    open link in a new window.

Added link will appear in the list of links, as well as in the list of available content while creating menu blocks.

JX Mega Menu Banners

In this section we will explain how to create banners in the Mega Menu.

The module has a table listing all the available banners. You can also add a new banner by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.
  • Select a file
    select a file, is mandatory to be filled in for the default language.
  • Enter Banner name
    banner title, is mandatory to be filled in for the default language.
  • Enter Banner URL
    link URL, is mandatory to be filled in for the default language.
  • Specific class
    block's CSS class.
  • Public Title
    public banner title.
  • Description
    set the description of the banner.
  • Open in new window
    open link in a new window.

Added banner will appear in the list of banners, as well as in the list of available content while creating menu blocks.

JX Mega Menu Video

In this section we will explain how to add a video in the Mega Menu.

The module has a table listing all the available videos. You can also add a new video by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.
  • Enter Video Name
    video title (the field is required).
  • Enter Video URL - add video link in the formats described below:
    • If this is a YouTube video, click on Embed and copy the code between the quotes for https://www.youtube.com/embed/video_id
    • If this is a Vimeo video, click on Share icon and in the Embed section copy the source code between the quotes for http://player.vimeo.com/video/video_id

Added video will appear in the list of videos, as well as in the list of available content while creating menu blocks.

JX Mega Menu Map

In this section we will explain how to add a map in the Mega Menu.

The module has a table listing all the available maps. You can also add a new map by clicking the '+' button in the top right of the table.

In the form that appears, fill in the required fields.
  • Enter Map item name
    the title of the map.
  • Enter Map latitude
    set a latitude value.
  • Enter Map longitude
    set a longitude value.
  • Marker
    adding a custom marker.
  • Enter Map scale
    the scale of the map (used 8 by default).
  • Map description
    set the description of the map.

Added map will appear in the list of maps, as well as in the list of available content while creating menu blocks.

JX Newsletter

The module displays a notification with a proposal to subscribe to store newsletter in a pop-up window. The email check can be enabled in module settings by means of confirmation email. You can also adjust the timeout between reminders for registered and non-registered users. Registered users can permanently give up on reminders.

The module is compliant with official PrestaShop General Data Protection Regulation (GDPR) module, a new EU legal framework that governs how users' personal data is used.

Module install/uninstall

This module can be installed/uninstalled like any other PrestaShop module.

Module settings

After module has been installed you can set Registered User Settings and Guest Settings below.

There are the following settings that you can set for Registered Users.

  • Live mode - enable/disable the module.
  • Verification email - choose if you want to send a verification email after the subscription.
  • Popup title - write down a newsletter popup title.
  • Popup message - write down a newsletter popup message.
  • Timeout for customers - set a timeout for popup reminding subscription for customers.
  • First delay - set a time that the user should spend on the site to see popup for the first time.

Here you can set the settings for Guests.

  • Live mode - enable/disable the module.
  • Verification email - choose if you want to send a verification email after the subscription.
  • Popup title - write down a newsletter popup title.
  • Popup message - write down a newsletter popup message.
  • Timeout for guests - set a timeout for not registered users.
  • First delay - set a time that the guest should spend on the site to see popup for the first time.

It is necessary to install and enable 'Newsletter block' for proper work of module.

JX Product List Gallery 2.0.0

This module displays all the available product images in form of a gallery on product listing pages. Depending on what settings you choose, the module can display images in form of a rollover or slideshow.

Module Installation and Deleting

This module can be installed and deleted like any other PrestaShop module.

Module settings

After the module is installed, navigate to \themes\classic\templates\catalog\_partials\miniatures\product.tpl. Open this file and find the following code:

    {block name='product_thumbnail'}
        {if $product.cover}
            <a href="{$product.url}" class="thumbnail product-thumbnail">
                <img src="{$product.cover.bySize.home_default.url}" alt="{if !empty($product.cover.legend)}{$product.cover.legend}{else}{$product.name|truncate:30:'...'}{/if}" data-full-size-image-url="{$product.cover.large.url}">
            </a>
        {else}
            <a href="{$product.url}" class="thumbnail product-thumbnail">
                <img src="{$urls.no_picture_image.bySize.home_default.url}">
            </a>
        {/if}
    {/block}

and replace it with:

    {block name='product_thumbnail'}
        {if $product.cover}
            <a href="{$product.url}" class="thumbnail product-thumbnail">
                {capture name='displayProductListGallery'}{hook h='displayProductListGallery' product=$product}{/capture}
                {if $smarty.capture.displayProductListGallery && count($product.images) > 1}
                    {hook h='displayProductListGallery' product=$product}
                {else}
                    <img src="{$product.cover.bySize.home_default.url}" alt="{if !empty($product.cover.legend)}{$product.cover.legend}{else}{$product.name|truncate:30:'...'}{/if}" data-full-size-image-url="{$product.cover.large.url}">
                {/if}
            </a>
        {else}
            <a href="{$product.url}" class="thumbnail product-thumbnail">
                <img src="{$urls.no_picture_image.bySize.home_default.url}">
            </a>
        {/if}
    {/block}

After installing and connecting the module, you can set it up on the module configuration page.

The module has the following main settings:
  • Live mode - ability to use the module in live mode.
  • Type - select display type: rollover, gallery or slideshow.

If you choose rollover, you can choose the animation effect:

Animation type:
  • Opacity slide - opacity changes;
  • Horizontal slide - horizontal;
  • Vertical slide - vertical.

If you choose gallery, you will find the following settings available:

  • Display items - the number of items displayed;
  • Visible items in row - the number of items in a row;
  • Use carousel - enable/disable the carousel for this block.

If you choose slideshow, you will find the following settings available:

  • Display items - the number of items displayed;
  • Use pager - pager display in slide show;
  • Use controls - controls display in slide show.

JX Product Zoomer

This module is an alternative solution for the standard product image zoom on the single product page. It's fully compatible with the standard additional products thumbnail carousel and product attributes changes. It allows you to choose among the three available options (window/lens/inner) for image zoom with the advanced plugin settings. The module is based on the Elevatezoom Plus plugin.

Installation and removing

The module is installed and deleted like any other PrestaShop module.

Module configuration

After the module has been installed you can configure it on the module configuration page.

By default, the configuration page shows a simplified set of options.

  • Live mode - module is on/off.
  • Fancybox - whether to show the enlarged image in the Fancybox on click.
  • Change image on hover - switch the main image on thumbnail hover (by default is set to switch on click).
  • Responsive - allows to the use adaptive functionality for plugin display on the mobile devices.
  • Zoom Type - choose the type of the enlarged image display mode
    • window - the enlarged image shows up next to the main image in one of the available (16) positions
    • lens - the image is zoomed in the lens container, on top of it
    • inner - the image is zoomed inside of main image container, fully covering it.
    The mobile devices (< 768) have "lens" mode activated instantly.
  • Extended settings - enables advanced settings for the experienced users. You can see the link to the official documentation for more details next to it.
Extended module configuration
  • Scroll Zoom - zoom ratio change on the mousewheel scroll (available for all types).
  • Cursor - cursor type on the magnified image hover. The following options are available: default, cursor, crosshair (available for all types).
  • Zoom settings - available for all types, if the 'Scroll Zoom' is enabled.
    • Zoom Level - the zoom level on the initial hover.
    • Min Zoom Level - a minimum zoom level.
    • Max Zoom Level - a maximum zoom level.
    • Scroll Zoom Increment - magnifying scroll increment.
  • Easing - the magnified image appearance effect (available for all types).
    • Zoom Easing - effect on/off.
    • Easing Amount - effect delay value.
  • Image Crossfade - main image blur outside the hover area (the lens) - available for window, lens.
  • Magnified image window settings - available for window.
    • Zoom Window Width - window width in px.
    • Zoom Window Height - window height in px.
    • Zoom Window Offset X - window offset on the X axis.
    • Zoom Window Offset Y - window offset on the Y axis.
    • Zoom Window Position - window position choice relatively to the main image (the positions available are presented on the image below this field).
    • Zoom Window Bg Color - window background image (for transparent images only).
    • Zoom Window Fade In - the effect of slowing the window appearance.
    • Zoom Window Fade Out - the effect of slowing the window disappearance.
    • Border Size - window border width in px.
    • Border Color - window border color.
  • Zoom Lens - zoom lens (available for window, lens).
    • Zoom Lens - on/off.
    • Lens Shape - lens type. It can take the following values: circular/rounded or squared/rectangular.
    • Lens Color - lens inner background color.
    • Lens Opacity - lens inner background opacity.
    • Lens Size - lens size in px.
    • Lens Fade In - the speed of lens appearance effect.
    • Lens Fade Out - the speed of lens disappearance effect.
    • Lens Border - lens border width.
    • Lens Border Color - lens border color.
    • Contain Lens Zoom - the restriction of the lens overflow outwards the main image container.
  • Tint - the shade effect on the area outside the lens (available for window).
    • Tint - effect on/off.
    • Tint Color - the lens outer area background.
    • Tint Opacity - the lens outer area opacity.
    • Tint Fade In - the appearance effect speed.
    • Tint Fade Out - the disappearance effect speed.
If you switch the zoom type, advanced options set is changed accordingly to show only the available parameters for the type selected.
Be careful when editing the extended settings. If the settings are set incorrectly, the effect can be ugly.

JX Search 1.1.0

This module is an extended search version that allows you to select a specific category for searching within its content. You can also change the category after defining the query. It also provides a possibility to set the additional product information display (description/price/manufacturer, etc.), and define the search results container layout, e.g., you can divide the results into a few sections with the controls (pagination, next/previous/show all). All the module settings are available in the main admin panel.

Installation and Deleting

The module is installed and deleted like any other PrestaShop module.

Module configuration

After module has been installed you can set it up on the module configuration page.

  • Enable Ajax Search - enables live search in a drop-down.
  • Minimum query length - number of symbols to start the result display.
  • Search in children category - enable/disable searching in children categories.
  • Number of shown results - number of products that shows up in the results section (number of products per page for the "pager" or "navigation" mode).
  • Display "Show All" button - displays the 'Show all' button below the results section, then click on it displays all found results.
  • Display pager - divides results into pages (depends on the 'Number of shown results' field value) and displays links to them.
  • Display navigation - shows the Previous/Next buttons.
  • Position of navigation - hook(s), to show the navigation (top/both/bottom options are available).
  • Highlight query result - highlights the text that matches search query.
  • Display image in Ajax search - shows product images in the results section.
  • Display description in Ajax search - shows product description in the results section.
  • Display prices in Ajax search - shows product price in the results section.
  • Display reference in Ajax search - shows product reference in the results section.
  • Display manufacturer in Ajax search - shows product manufacturer in the results section.
  • Display suppliers in Ajax search - shows product suppliers in the results section.
  • Blog search - enable/disable search by blog posts.

Some parameters might differ depending on the combination used.

JX Wishlist

JX Wishlist module is created to give the ability to the visitors of online store to add products to wishlists and share these wishlists on Facebook.

Module Installation

То install the module navigate to Admin panel -> Modules -> Modules and Services, find the JX Wishlist module and press 'Install' button (1).

Module Configuration

After the module has been installed, the 'Settings' page will appear.
Add the Facebook App Id to the required field (1) and press 'Save' button (2).
The instruction how to get the Facebook App Id can be found here: Creating an App ID.

Using JX Wishlist Module

Adding product to wishlist

Shop visitors should be logged in to be able to add the items to the wishlists.

  • After the module is installed, the button 'Add to wishlist' appears on each product page. It should look like on the screenshot below (1).

  • After clicking this button a shop visitor will see a notification: 'The product was successfully added to your wishlist.' It can be closed or skipped to wishlists view by clicking 'My wishlists' button (2).

Browsing Wishlists
  • On 'My Wishlists' page a client can add the new wishlist (1) or view the list of created ones (2).

  • Clicking 'View wishlist' button (1) will open the wishlist page, the 'View products' button (2) gives the ability to see the products list of this wishlist on current page.
    The title of wishlist can be edited (3) or deleted (4).
    To share the wishlist the visitor should press the 'Share' button (5).

  • While looking through the items in wishlist after clicking 'View products' button, each item can be removed from the list (1).

Sharing Wishlists

To share the wishlist the visitor should press the 'Share' button. There will be a few easy steps to follow before posting the wishlist. During each step, there's an ability to go back and change the sharing options.

  • First step is to choose the layout for wishlist that will be posted.

  • Then the products should be added. Each cell with a '+' is a button to add the product image.

    Choosing the images of each product:

  • When all images are added, the visitor should press the 'Share' button (1).

  • In a small window which is then appeared, there will be some standard posting options to choose and the ability to add some text to the post. After clicking 'Post to Facebook' button, the post will be published.

Statistics

Using this module you can also get the statistics collected while the products are added to wishlists. Thus, you will know which products are currently popular. This information can be very useful for suggesting a discount, for example.
You can view the statistics navigating to Admin panel -> Stats -> Stats -> JX Wishlist.

  • You can select the period for viewing the statistics from the specified time (1).
  • In the first column, there's a number of products that were added (2).
  • The second column is created for your convenience. You can use it to see how many of added products were sold (3).